Layer 1

Is Newton Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:47 pm, August 13, 2022
+

Table of Contents

Can You Drink Tap Water in Newton?

Yes, Newton's tap water is generally considered safe to drink as Newton has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page, the city's water provider website, or Newton's local Twitter account.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Newton's water utility, Newton Water Dept. (Mwra), had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. This assessment is based on the Newton Water Dept. (Mwra) water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Water Quality Report for Newton Tap Water

The most recent publicly available numbers for measured contaminant levels in Newton tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.

Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.

EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.

There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.

We recommend looking at the contaminants present in Newton's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.

Newton Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named Newton Water Dept. (Mwra) for Newton in Massachusetts. For more details please see the "What do these Violations Mean?" section below.

For the compliance period beginning July 1, 2015, Newton had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Follow-up Or Routine LCR Tap M/R which falls into the Chemicals rule code group, and the Lead and Copper Rule rule code family for the following contaminant code: Lead and Copper Rule.

Is there Lead in Newton Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Newton water system, Newton Water Dept. (Mwra), between sample start date and sample end date, were at or below, 0.00445 mg/L of lead in Newton water. This is 29.7% of the 0.015 mg/L action level. This means 10% of the samples taken from Newton contained more lead.

While Newton water testing may have found 0.00445 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Newton Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - Hanscom Air Force Base - near Newton with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Newton has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

Newton SDWA Violation History Table - Prior 10 Years

Compliance Period Status Health-Based? Category Code Code Rule Code Contaminant Code Rule Group Code Rule Family Code
07/01/2015 - Resolved No Monitoring and Reporting (MR) Follow-up Or Routine LCR Tap M/R (52) Lead and Copper Rule (350) Lead and Copper Rule (5000) Chemicals (300) Lead and Copper Rule (350)

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Newton Water - Frequently Asked Questions

HOW DO I CONTACT NEWTON CUSTOMER SERVICE?
To contact customer service for the Newton water provider, Newton Water Dept. (Mwra), please use the information below.
By Mail: 1000 COMMONWEALTH AVE
NEWTON, MA, 02459
HOW TO PAY BILL FOR NEWTON WATER DEPT. (MWRA)
Already have an account?

Existing customers can login to their Newton Water Dept. (Mwra) account to pay their Newton water bill by clicking here.

Want to create a new account?

If you want to pay your Newton Water Dept. (Mwra) bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Newton water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Newton water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP NEWTON WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Newton means you will often need to put the water in your name with Newton Water Dept. (Mwra). In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Newton means you will likely need to take your name off of the water bill with Newton Water Dept. (Mwra). In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

Is Newton Tap Water Safe to Drink? Tap water & safety quality

The estimated price of bottled water

$1.61 in USD (1.5-liter)

USER SUBMITTED RATINGS

Newton tap water
  • Drinking Water Pollution and Inaccessibility 1% Very Low
  • Water Pollution 50% Moderate
  • Drinking Water Quality and Accessibility 99% Very High
  • Water Quality 50% Moderate

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Newton, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Contaminants


Newton Water Department (MWRA)

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Massachusetts Department of Environmental Protection, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 89045
  • Data available: 2012-2017
  • Data Source: Purchased surface water
  • Total: 18

Contaminants That Exceed Guidelines

  • Bromodichloromethane*
  • Chloroform*
  • Dibromochloromethane*
  • Dichloroacetic acid*
  • Radium%2C combined (-226 & -228)*
  • Total trihalomethanes (TTHMs)*

Other Detected Contaminants

  • Aluminum*
  • Barium*
  • Bromide*
  • Chlorate
  • Chromium (total)
  • Fluoride*
  • Haloacetic acids (HAA5)*
  • Manganese*
  • Monochloroacetic acid*
  • Nitrate*
  • Strontium
  • Trichloroacetic acid*

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

Newton buys water straight from the Massachusetts Water Resources Authority (MWRA). The water originates from the Quabbin Reservoir, approximately 65 miles west of Boston, and the Wachusett Reservoir, nearly 35 miles west of Boston. Water from the Ware River may also boost the provision now and then. These primary reservoirs supply bulk water to local water departments in 51 areas. The two reservoirs merged produced about 200 million gallons every day of high-quality water to customers in 2019.

The Massachusetts Water Resource Authority manages state-of-the-art treatment methods. It’s committed to providing a reliable facility and ensuring your water is harmless, pure, and tastes excellent. Excessive pipelines and tunnels support inspection and maintenance of necessary facilities while ensuring uninterrupted service. The MWRA also improves and repairs channels completely to the circulation system to boost safety and water quality.

The City’s main pipes aren’t the product of lead. Water emanates from the mains to residences, other buildings, and outdoor installations like bubblers in parks through service lines. These lines run from the mains onto the building and aren’t shared by the different structures.

Layer 1
Layer 1
Layer 1
Layer 1