Layer 1

Is Cumberland Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:47 pm, July 15, 2022
+

Table of Contents

Can You Drink Tap Water in Cumberland?

Yes, Cumberland's tap water is generally considered safe to drink as Cumberland has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page or the city's water provider website.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Cumberland's water utility, City of Cumberland, had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. This assessment is based on the City of Cumberland water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Cumberland Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named City of Cumberland for Cumberland in Maryland. For more details please see the "What do these Violations Mean?" section below.

For the compliance period beginning Oct. 1, 2017, Cumberland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Follow-up Or Routine LCR Tap M/R which falls into the Chemicals rule code group, and the Lead and Copper Rule rule code family for the following contaminant code: Lead and Copper Rule.

For the compliance period beginning July 1, 2013, Cumberland had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Consumer Confidence Report Inadequate Reporting which falls into the Other rule code group, and the Consumer Confidence Rule rule code family for the following contaminant code: Consumer Confidence Rule.

Is there Lead in Cumberland Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Cumberland water system, City of Cumberland, between sample start date and sample end date, were at or below, 0.000772 mg/L of lead in Cumberland water. This is 5.1% of the 0.015 mg/L action level. This means 10% of the samples taken from Cumberland contained more lead.

While Cumberland water testing may have found 0.000772 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Cumberland Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - ROCKET CTR WVA WV ABL MNR - near Cumberland with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Cumberland has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

Cumberland SDWA Violation History Table - Prior 10 Years

Compliance Period Status Health-Based? Category Code Code Rule Code Contaminant Code Rule Group Code Rule Family Code
10/01/2017 - Resolved No Monitoring and Reporting (MR) Follow-up Or Routine LCR Tap M/R (52) Lead and Copper Rule (350) Lead and Copper Rule (5000) Chemicals (300) Lead and Copper Rule (350)
07/01/2013 - Resolved No Other Violation (Other) Consumer Confidence Report Inadequate Reporting (72) Consumer Confidence Rule (420) Consumer Confidence Rule (7000) Other (400) Consumer Confidence Rule (420)

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Cumberland Water - Frequently Asked Questions

HOW DO I CONTACT CUMBERLAND CUSTOMER SERVICE?
To contact customer service for the Cumberland water provider, City of Cumberland, please use the information below.
By Mail: EVITTS CREEK WATER COMPANY
57 NORTH LIBERTY STREET
CUMBERLAND, MD, 21502
HOW TO PAY BILL FOR CITY OF CUMBERLAND
Already have an account?

Existing customers can login to their City of Cumberland account to pay their Cumberland water bill by clicking here.

Want to create a new account?

If you want to pay your City of Cumberland bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Cumberland water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Cumberland water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP CUMBERLAND WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Cumberland means you will often need to put the water in your name with City of Cumberland. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Cumberland means you will likely need to take your name off of the water bill with City of Cumberland. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

The estimated price of bottled water

$1.5 in USD (1.5-liter)

USER SUBMITTED RATINGS

Cumberland tap water
  • Drinking Water Pollution and Inaccessibility 34% Low
  • Water Pollution 36% Low
  • Drinking Water Quality and Accessibility 67% High
  • Water Quality 64% High

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Cumberland, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Contaminants


City of Cumberland

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Maryland Department of the Environment, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 27039
  • Data available: 2012-2017
  • Data Source: Surface water
  • Total: 11

Contaminants That Exceed Guidelines

  • Bromodichloromethane
  • Chloroform
  • Nitrate
  • Nitrate and nitrite
  • Total trihalomethanes (TTHMs)

Other Detected Contaminants

  • Barium
  • Di(2-ethylhexyl) phthalate
  • Ethylene dibromide
  • Fluoride
  • Haloacetic acids (HAA5)
  • Strontium

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

'

Most of us have heard of the recent news that contaminated tap water was found in a small Tennessee city, but what is it? Is it something we should be worried about or should we just go on with our lives?

If you''re like me, the news report and all the headlines and coverage around this issue have made you think and worry. It''s easy to start thinking, "Well, isn''t that just another example of how the government is overstepping its authority? Why would they want to get into our private homes and turn it into an illegal experiment?"

However, there are some things that you should take into consideration when this story comes up, no matter how big a worry you are. And, I think you will find they are pretty reasonable. After all, they are all based on the same premise - if you don''t want to drink contaminated water, you need to make sure you do everything in your power to make sure it stays that way.

So what are the risks involved? First of

Layer 1
Layer 1
Layer 1
Layer 1