Layer 1

Is Cleveland Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:47 pm, August 1, 2022
+

Table of Contents

Can You Drink Tap Water in Cleveland?

Yes, Cleveland's tap water is generally considered safe to drink as Cleveland has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page, the city's water provider website, or Cleveland's local Twitter account.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Cleveland's water utility, Cleveland Public Water System, had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. The last violation for Cleveland was resolved on July 31, 2017. This assessment is based on the Cleveland Public Water System water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Water Quality Report for Cleveland Tap Water

The most recent publicly available numbers for measured contaminant levels in Cleveland tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.

Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.

EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.

There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.

We recommend looking at the contaminants present in Cleveland's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.

Cleveland Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named Cleveland Public Water System for Cleveland in Ohio. For more details please see the "What do these Violations Mean?" section below.

From July 1, 2017 to July 31, 2017, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From June 1, 2017 to June 30, 2017, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From May 1, 2017 to May 31, 2017, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From April 1, 2017 to April 30, 2017, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From March 1, 2017 to March 31, 2017, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From Feb. 1, 2017 to Feb. 28, 2017, Cleveland had 2 non-health based Safe Drinking Water Act violations with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant codes: Interim Enhanced Surface Water Treatment Rule, Interim Enhanced Surface Water Treatment Rule.

From Dec. 1, 2016 to Dec. 31, 2016, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From July 1, 2014 to July 31, 2014, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Routine Minor (TCR) which falls into the Microbials rule code group, and the Total Coliform Rules rule code family for the following contaminant code: Coliform (TCR).

From June 1, 2014 to June 30, 2014, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Routine Minor (TCR) which falls into the Microbials rule code group, and the Total Coliform Rules rule code family for the following contaminant code: Coliform (TCR).

From Aug. 1, 2013 to Aug. 31, 2013, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From Aug. 1, 2012 to Aug. 31, 2012, Cleveland had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

Is there Lead in Cleveland Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Cleveland water system, Cleveland Public Water System, between sample start date and sample end date, were at or below, 0.0 mg/L of lead in Cleveland water. This is 0% of the 0.015 mg/L action level. This means 10% of the samples taken from Cleveland contained more lead.

While Cleveland water testing may have found 0.0 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Cleveland Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - Camp Ravenna - near Cleveland with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Cleveland has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

Cleveland SDWA Violation History Table - Prior 10 Years

Compliance Period Status Health-Based? Category Code Code Rule Code Contaminant Code Rule Group Code Rule Family Code
07/01/2017 - 07/31/2017 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
06/01/2017 - 06/30/2017 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
05/01/2017 - 05/31/2017 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
04/01/2017 - 04/30/2017 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
03/01/2017 - 03/31/2017 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
02/01/2017 - 02/28/2017 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
02/01/2017 - 02/28/2017 Archived No Monitoring and Reporting (MR) Failure Submit Filter Profile/CPE Report (29) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
12/01/2016 - 12/31/2016 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
07/01/2014 - 07/31/2014 Resolved No Monitoring and Reporting (MR) Monitoring, Routine Minor (TCR) (24) Total Coliform Rule (110) Coliform (TCR) (3100) Microbials (100) Total Coliform Rules (110)
06/01/2014 - 06/30/2014 Resolved No Monitoring and Reporting (MR) Monitoring, Routine Minor (TCR) (24) Total Coliform Rule (110) Coliform (TCR) (3100) Microbials (100) Total Coliform Rules (110)
08/01/2013 - 08/31/2013 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)
08/01/2012 - 08/31/2012 Resolved No Monitoring and Reporting (MR) Monitoring, Turbidity (Enhanced SWTR) (38) Long Term 1 Enhanced Surface Water Treatment Rule (122) Interim Enhanced Surface Water Treatment Rule (0300) Microbials (100) Surface Water Treatment Rules (120)

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Cleveland Water - Frequently Asked Questions

HOW TO READ THE WATER QUALITY DATA TABLE: EPA ESTABLISHES THE SAFE DRINKING WATER REGULATIONS THAT LIMIT THE AMOUNT OF CONTAMINANTS ALLOWED IN DRINKING WATER. THE TABLE SHOWS THE CONCENTRATIONS OF DETECTED SUBSTANCES IN COMPARISON TO REGULATORY LIMITS. SUBSTANCES THAT WERE TESTED FOR, BUT NOT DETECTED, ARE NOT INCLUDED IN THIS TABLE. LISTED BELOW IS INFORMATION ON THOSE CONTAMINANTS THAT WERE FOUND IN CLEVELAND WATER’S DRINKING WATER AT EACH OF OUR FOUR TREATMENT PLANTS. THE RESULTS IN THE TABLE WERE EITHER COLLECTED DURING 2020 OR WERE USED FOR COMPLIANCE IN 2020. TYPICAL SOURCES ARE SHOWN FOR EACH CONTAMINANT. TTHMS, HAA5S, AND TOC ALSO INCLUDE 9 MONTHS OF 2019 DATA AS REQUIRED FOR THE COMPLIANCE CALCULATIONS.
*Turbidity is a measure of the cloudiness of water and is an indication of the effectiveness of our filtration system. The turbidity limit set by the EPA is 0.3 NTU in 95% of the samples analyzed each month, and shall not exceed 1 NTU at any time for each of our water treatment plants. #The value reported under “Level Found” for Total Organic Carbon (TOC) is the lowest running annual average ratio between the percent of TOC actually removed to the percent of TOC required to be removed. A value of greater than one indicates that the water system is in compliance with TOC removal requirements. A value of less than one indicates a violation of the TOC removal requirements. The value reported under the “Range” for TOC is the lowest monthly ratio to the highest monthly ratio. ** Cleveland Water has a combined distribution system. Data listed represents this and therefor is identical for each treatment plant.
HOW TO DETERMINE IF YOU HAVE LEAD IN YOUR WATER SYSTEM
Cleveland Water is virtually lead free when it leaves our treatment plants. Our water mains are not made from lead. Lead can be present in service lines and in customers’ plumbing, faucets and fixtures. Not all customers have lead in their service line or plumbing system. CHECK Check the type of material of your city-owned service line online at clevelandwater.com/lead. TEST Test your service line material. Our video shows you how (http://youtube.com/watch?v=AiU7GHzD_Ck). If a magnet sticks to the service line where it enters your home, it is galvanized steel. If you scratch the pipe with a penny and the metal is shiny like a penny, it is copper. If the scratched metal is shiny silver and flakes off, it is lead. You can record your results online or call us at 216-664-2882 and we will record the results for you (see pictures on page 16). DATE The date plumbing components in your home were made/installed is important. Homes built after 1954 should not have a lead service line or lead plumbing. Before 1986, the level of lead in solder used to join copper pipes was usually 50%. In 1986, the allowable level of lead in solder was reduced to less than 0.2% and the allowable level in brass components in potable water faucets was reduced to less than 8%. In 2014, the allowable level of lead in brass alloy used for potable water faucets, fittings and meters was reduced to less than 0.25%.
HOW DO I CONTACT CLEVELAND CUSTOMER SERVICE?
To contact customer service for the Cleveland water provider, Cleveland Public Water System, please use the information below.
By Mail: Cleveland Water
1201 Lakeside Avenue
CLEVELAND, OH, 44114
HOW TO PAY BILL FOR CLEVELAND PUBLIC WATER SYSTEM
Already have an account?

Existing customers can login to their Cleveland Public Water System account to pay their Cleveland water bill by clicking here.

Want to create a new account?

If you want to pay your Cleveland Public Water System bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Cleveland water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Cleveland water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP CLEVELAND WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Cleveland means you will often need to put the water in your name with Cleveland Public Water System. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Cleveland means you will likely need to take your name off of the water bill with Cleveland Public Water System. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

Is Cleveland Tap Water Safe to Drink? Tap water & safety quality

The estimated price of bottled water

$2.15 in USD (1.5-liter)

USER SUBMITTED RATINGS

Cleveland tap water
  • Drinking Water Pollution and Inaccessibility 21% Low
  • Water Pollution 53% Moderate
  • Drinking Water Quality and Accessibility 79% High
  • Water Quality 48% Moderate

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Cleveland, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Cleveland Water Quality Report (Consumer Confidence Report)

The EPA mandates that towns and cities consistently monitor and test their tap water. They must report their findings in an annual Consumer Confidence Report. Below is the most recent water quality report from Cleveland's Water. If you would like to see the original version of the report, please click here.

Cleveland Water

2 0 2 0 W A T E R Q U A L I T Y R E P O R T

Cleveland Water has a current, unconditional license to operate our public water system, the 10th largest in the United States.

D R I N K S A F E W AT E R

I

1

 

OUR SERVICE AREA

L E G E N D

City & Suburbs

Low Service Suburbs 1st High Suburbs

2nd High Suburbs 3rd High Suburbs

Cleveland

Master Meter

Cleveland Water is the 10th largest public water system in the United States, largest system in Ohio and largest system sourcing Lake Erie. Every day, we treat and deliver up to 300 million gallons of water to more than 1.45 million people and thousands of businesses, schools, churches and recreation centers through more than 442,000 customer accounts. We provide water to our 640-square mile service area through nearly 5,400 miles of mains in 80 communities in Cuyahoga County and parts of four surrounding counties – Geauga, Medina, Portage and Summit. In 2020, our average demand was 201 million gallons per day, which is 73.6 billion gallons of water for the year.

2

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

2020 – A YEAR LIKE NO OTHER

Martin J. Keane

Alex Margevicius

Public recognition of the importance of a safe tap water supply was more evident in 2020 than it has been in generations. During this year, a global health pandemic changed the way society functions. At the same time, Cleveland Water renewed our 164-year old commitment to providing our customers the best available supply of water to use for drinking, bathing, flushing, cleaning surfaces and washing hands.

We’ve stated for decades that, “the health and safety of our customers is our number one priority.” We continued to prove that in 2020 by halting disconnections and reconnecting shutoffs. We developed and distributed premise flushing instructions so customers know the health importance of removing old water that had sat stagnant for months and replacing it with safe water when water has not been used in buildings for extended periods of time.

We realigned water treatment plant operators’ schedules to promote social distancing. We ensured chemical supply chains that are critical to safe water treatment were maintained. We integrated new source water monitoring technology. We implemented new safety protocols to ensure our plants could keep producing water, our field crews could keep repairing mains, and our office workers could continue to assist custom- ers. We did this for you and for us. We drink the same water you drink and together we will continue to improve the society in which we live.

Martin J. Keane

Director, Department of Public Utilities

Alex Margevicius

Commissioner, Cleveland Water Department

Cleveland Water’s commitment to providing economical, high quality drinking water is reflected in this 2020 Water Quality Report, which we’ve prepared to provide information to our consumers. Cleveland Water is in compliance with all Maximum Contaminant Levels and Treatment Techniques for drinking water. Cleveland Water had a 2020 unconditioned license to operate our water system. The license is issued by the Ohio Environmental Protection Agency. Included within this report is general health information, water quality test results, how to participate in decisions concerning your drinking water and water system contacts.

D R I N K S A F E W AT E R

I

3

 

LAKE ERIE – OUR SOURCE WATER

Cleveland draws source water from four intakes located far offshore in Lake Erie’s Central Basin. These intakes are spread out over 15 miles and are each 3 to 5 miles offshore where the water is cleaner and has been minimally impacted from tributary runoff and coastal activities. Lake Erie is considered to be a surface water source. Cleveland Water also has interconnections with other area water systems, but these are for emergency use only. These interconnections are designed for Cleveland Water to assist other water systems if needed. We received no emergency water in 2020.

Lake Erie

Water enters Lake Erie from precipitation over the lake and watershed. Precipitation on land runs off and flows down streams and rivers into our source water. About 90% of the water entering Lake Erie flows down the Detroit River from Lake St. Clair; another 4% drains from the Maumee River. Both rivers flow into the lake’s shallow Western Basin. The remaining runoff drains through dozens of rivers and streams into the lake or off the land along the shore directly into the water. The actions of people on land in Lake Erie’s 30,149 square mile watershed can impact the quality of water in Lake Erie. Protecting our drinking water source from contamination is the responsibility of all area residents.

The state of Ohio performed an assessment of our four source water intakes in the late 1990s. A Drinking Water Source Assessment Report was completed in 2003. For the purposes of source water assessments, all surface waters are considered to be susceptible to contamination. By their nature, surface waters are accessible and can be easily contaminated by chemicals and pathogens from an upstream spill. Because Cleveland Water’s intakes are located a considerable distance offshore, potential contamination from the Cuyahoga River and nearshore sources is minimized to a great degree. As a result, Ohio EPA considers Cleveland Water’s source water (Lake Erie) to have a low susceptibility to contamination due to the location of our intakes.

The Cleveland Water public water system treats the water to meet drinking water quality standards, but no single treatment technique can address all potential contaminants. To address this, Cleveland Water uses the multiple barrier approach for protecting and treating our source water. Protection of source water is one of the barriers we use. The potential for water quality impacts can be further decreased by implementing measures to protect Lake Erie. More detailed information is provide in the Cleveland Water Drinking Water Source Assessment Report which can be obtained by calling our Risk Management Section at 216-664-2444 x75838.

4

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

WHAT TO EXPECT FROM PUBLIC WATER SYSTEMS IN THE UNITED STATES

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.

Contaminants that may be present in source water include:

  1. Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations and wildlife;
  2. Inorganic contaminants, such as salts and metals, which can be naturally- occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming;
  3. Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential uses;
  4. Organic chemical contaminants, including synthetic and volatile organic chemicals, which are byproducts of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems;
  5. Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.

In order to ensure that tap water is safe to drink, USEPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. Food and Drug Administration (FDA) regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s Safe Drinking Water Hotline (1-800-426-4791).

Some people may be more vulnerable to contaminants in drinking water than the general population. Immunocompromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infection. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (1-800-426-4791).

D R I N K S A F E W AT E R

I

5

 

CRIB

HOW WE MAKE THE WATER SAFE

INTAKE TUNNEL

SCREENS

RAW WATER PUMPS

RAPID MIX

FLOCCULATION

SEDIMENTATION

FILTRATION

DISINFECTION & FINISHING

TESTING & PUMPING

Cleveland Water has four drinking water treatment plants. While different in age and appearance, each plant uses a conventional drinking water treatment process followed by disinfection with chlorine to make the water safe. The basic treatment process (steps 1-10), along with the treatment chemicals (letters A-G), are shown on the diagram below. This treatment process is effective at removing and inactivating viruses and other pathogens. The U.S. Environmental Protection Agency (USEPA) gives our treatment process credit for inactivating 99.99% of all viruses, and we do this every minute of every day with all the water we produce. In fact, Health Canada indicates properly operating treatment processes like ours can achieve at least

an 8-log inactivation of viruses in general (i.e., 99.999999%). As seen below, the disinfectant chlorine is added as the last step in the treatment process within our closed system. This means there is zero human interaction with water from the time chlorine is added until the water comes out of your faucet.

GG

B C

A

REMOVED IN STEPS 7 AND 8

  1. POTASSIUM PERMANGANATE [KMnO4]
  2. POWDERED ACTIVATED CARBON, “PAC”
  3. ALUMINUM SULFATE, “ALUM” [Al2(SO4)3]

6

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

D E F

  1. SODIUM HYPOCHLORITE, “CHLORINE” [NaOCl]
  1. HYDROFLUOSILICIC ACID, “FLUORIDE” [H2SiF6]
  2. PHOSPHORIC ACID “ORTHOPHOSPHATE” [H3PO4]
  3. SODIUM HYDROXIDE [NaOH]
    • ADDED IN STEPS 3 OR 9 WHEN NEEDED TO ADJUST pH

HOW CLEVELAND WATER COMPARES NATIONALLY

Across the United States, approximately 150,000 public water systems provide water to 90% of Americans by following U.S. EPA Safe Drinking Water Act regula- tions that require testing and elimination of more than 90 potential water con- taminants. EPA sets limits for contaminants based on levels that protect human health and that water systems can achieve using the best available technology. EPA rules establish water-testing schedules and methods that water systems must follow. EPA updates rules and regulations regularly, as new technology becomes available.

Cleveland Water holds ourselves to a higher standard than what is set by the EPA. Each of our water treatment plants has achieved advanced levels of treatment

in the national Partnership for Safe Water. The partnership is a voluntary effort between six prestigious drinking water organizations and more than 300 water utilities. The partnership’s goal is to optimize treatment plant performance and distribution system operations beyond what regulations require. The result is the production and delivery of superior quality water to all users. Each of our plants go through annual re-certification based on performance. The Phase 3 Directors Award and Phase 4 Presidents Award are the highest levels that can be achieved.

Crown

• Phase 3 certification 2004 to present.

• Phase 4 certification 2014 to present.

• Plant online since 1958

• Averaging 41.4 million gallons of water made daily

Garrett Morgan

  • Phase 3 certification 2004 to present.
  • Plant online since 1918
  • Averaging 41 million gallons of water made daily

Baldwin

  • Phase 3 certification 2006 to present.
  • Plant online since 1925
  • Averaging 60.6 million gallons of water made daily

Nottingham

  • Phase 3 certification 1997 to present.
  • Plant online since 1951
  • Averaging 58.4 million gallons of water made daily

D R I N K S A F E W AT E R

I

7

 

ABOUT YOUR DRINKING WATER

The EPA requires regular sampling to ensure drinking water safety. Cleveland Water conducted sampling for bacteria, and for inorganic, synthetic organic, and volatile organic contaminants during 2020. We were not required to monitor for radiological parameters in 2020.

To confirm the water is safe, we continuously monitor more than 20,000 parameters in the water treatment process to ensure each of our four plants is functioning properly. We also collect more than 350 samples each month from our distribution system and perform over 160,000 tests each year to ensure proper treatment and disinfection in order to keep our customers safe. Samples are analyzed for contaminants, most of which were not detected in the Cleveland Water supply. The Ohio EPA requires us to monitor for some contaminants less than once per year because the concentrations of these contaminants do not change frequently. Some of our data, though accurate, are more than one year old. Listed in the table (pages 10-11) is information on those contaminants that were found.

ONLY TAP WATER DELIVERS BENEFITS

Public Health Protection – A safe water supply is critical to protecting public health. In the United States, water utilities monitor for more than 100 contaminants–including UCMRs– and must meet close to 90 regulations for water supply and quality.

Fire Protection – A well-maintained water system is critical in protecting communities from the threat of fire. The same system of water mains, pumps and storage tanks transports water to homes and to fire hydrants.

Vital Economic Resource – Thousands of businesses use Cleveland Water as a core element in their products or manufacturing processes. Having a safe, reliable and virtually unlimited water supply gives business leaders confidence in locating, staying and investing in our community.

8

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

DEFINITIONS OF SOME TERMS CONTAINED WITHIN THIS REPORT

Maximum Contaminant Level Goal (MCLG): The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

Maximum Contaminant Level (MCL): The highest level of contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

Maximum Residual Disinfectant Level Goal (MRDLG): The level of drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

Maximum Residual Disinfectant Level (MRDL): The highest level of a disinfectant allowed in drinking water. There is con- vincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Action Level (AL): The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

  • For lead, the action level is exceeded if the concentration of lead in more than 10% of tap water samples collected during a monitoring period is greater than 0.015 ppm, i.e., if the 90th percentile lead levels is at or greater than 0.015 ppm.
  • For copper, the action level is exceed if the concentration of copper in more than 10% of the tap samples collected during a monitoring period is at or greater than 1.3 ppm.

Lead Threshold Level (LTL): The concentration of lead in an individual tap water sample that is at or greater than 0.015 ppm.

Treatment Technique (TT): A required process intended to reduce the level of a contaminant in drinking water.

Turbidity: A measure of the cloudiness of water and an indication of the effectiveness of our filtration system. The turbidity limit set by the EPA is 0.3 NTU in 95% of the monthly samples and shall not exceed 1 NTU at any time.

Parts per Million (ppm) or milligrams per Liter (mg/L): Units of measure for concentration of a contaminant. A part per million corresponds to one second in a little over 11.5 days or 1 drop in a 10-gallon aquarium.

Parts per Billion (ppb) or micrograms per Liter (µg/L): Units of measure for concentration of a contaminant. A part per billion corresponds to one second in 31.7 years or 1 drop in a 30-foot diameter, 4-foot deep pool (21,000 gallons).

The “<” symbol: A symbol which means less than. A result of <5 means that the lowest level that could be detected was 5 and the contaminant in that sample was not detected.

Infrastructure maintenance helps ensure the safe water that we make at the treatment plants comes out of your tap. In 2020, various water towers in our distribution system were drained, inspected and recoated including the towers at Blossom Hill in Brecksville, which were painted green to blend in with the tree line.

D R I N K S A F E W AT E R

I

9

 

TABLE OF DETECTED CONTAMINANTS

How to read the Water Quality Data Table: EPA establishes the safe drinking water regulations that limit the amount of contaminants allowed in drinking water. The table shows the concentrations of detected substances in comparison to regulatory limits. Substances that were tested for, but not detected, are not included in this table. Listed below is information on those contaminants that were found in Cleveland Water’s drinking water at each of our four treatment plants. The results in the table were either collected during 2020 or were used for compliance in 2020. Typical sources are shown for each contaminant. TTHMs, HAA5s, and TOC also include 9 months of 2019 data as required for the compliance calculations.

 

 

 

 

 

CROWN

 

 

MORGAN

 

 

Contaminants (Units)

MCLG

MCL

Level Found

Range of

Violation

Level Found

Range of

Violation

 

[Typical Sources in Drinking Water]

Detections

Detections

 

 

 

 

 

 

 

Microbiological

Turbidity (NTU)

n/a

TT*

100%

n/a

No

100%

n/a

No

Turbidity (% meeting standard)

TT* (%)

 

[Soil runoff]

n/a

(< 1 NTU)

0.07

0.03 - 0.07

No

0.12

0.03 - 0.12

No

 

 

 

 

 

 

 

 

 

[Soil runoff]

 

 

compliant

 

 

compliant

 

 

 

Barium (ppm)

 

 

 

 

 

 

 

 

 

[Discharge of drilling wastes;

2

2

0.0156

n/a

No

0.0156

n/a

No

 

discharge from metal refineries;

 

 

 

 

 

 

 

 

 

Inorganic

erosion of natural deposits]

 

 

 

 

 

 

 

 

Fluoride (ppm)

 

 

 

 

 

 

 

 

 

[Water additive which promotes

4

4

0.95

0.83 - 1.08

No

0.98

0.81 - 1.19

No

 

strong teeth]

 

 

 

 

 

 

 

 

 

Nitrate as Nitrogen (ppm)

 

 

 

 

 

 

 

 

 

[Runoff from farm fertilizer use;

10

10

0.85

ND - 0.85

No

0.84

ND - 0.84

No

 

leaching from septic tanks; sewage;

 

 

 

 

 

 

 

 

 

 

erosion of natural deposits]

 

 

 

 

 

 

 

 

 

TTHMs (ppb)**

 

 

 

 

 

 

 

 

 

[Total Trihalomethanes are a byproduct

n/a

80

38.4

12.1 - 51.3

No

38.4

12.1 - 51.3

No

 

of drinking water chlorination]

 

 

 

 

 

 

 

 

Organic

HAA5 (ppb)**

 

 

 

 

 

 

 

 

[Haloacetic Acids are a byproduct of

n/a

60

21.25

0 - 31

No

21.25

0 - 31

No

drinking water chlorination]

 

 

 

 

 

 

 

 

 

Total Organic Carbon#

 

 

 

 

 

 

 

 

 

[Naturally present in the environ-

n/a

TT

1.31

1.36 - 1.48

No

1.35

1.2 - 1.44

No

 

ment]

 

 

 

 

 

 

 

 

Disinfectant

Total Chlorine (ppm)

MRDLG

MRDL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Water additive used to control

4

4

1.11

1.07 - 1.19

No

1.14

1.08 - 1.21

No

 

microbes]

 

 

 

 

 

 

*Turbidity is a measure of the cloudiness of water and is an indication of the effectiveness of our filtration system. The turbidity limit set by the EPA is 0.3 NTU in 95% of the samples analyzed each month, and shall not exceed 1 NTU at any time for each of our water treatment plants.

#The value reported under “Level Found” for Total Organic Carbon (TOC) is the lowest running annual average ratio between the percent of TOC actually removed to the percent of TOC required to be removed. A value of greater than one indicates that the water system is in compliance with TOC removal requirements. A value of less than one indicates a violation of the TOC removal requirements. The value reported under the “Range” for TOC is the lowest monthly ratio to the highest monthly ratio.

** Cleveland Water has a combined distribution system. Data listed represents this and therefor is identical for each treatment plant.

1 0

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

 

 

BALDWIN

 

 

 

 

 

NOTTINGHAM

 

 

Level Found

 

Range of

 

Violation

 

Level Found

 

Range of

 

Violation

 

 

 

 

 

 

Detections

 

 

 

Detections

 

 

 

 

 

 

 

 

 

 

0.16

 

0.02 - 0.16

 

No

 

0.1

 

0.02 - 0.1

 

No

 

 

 

 

 

100%

 

n/a

 

No

 

100%

 

n/a

 

No

compliant

 

 

 

compliant

 

 

 

 

 

 

 

 

 

 

 

0.0156

 

n/a

 

No

 

0.0148

 

n/a

 

No

1.03

 

0.86 - 1.30

 

No

 

0.98

 

0.82 - 1.19

 

No

0.7

 

ND - 0.7

 

No

 

0.55

 

ND - 0.55

 

No

38.4

 

12.1 - 51.3

 

No

 

38.4

 

12.1 - 51.3

 

No

21.25

 

0 - 31

 

No

 

21.25

 

0 - 31

 

No

1.33

 

1.42 - 1.51

 

No

 

1.4

 

1.22 - 1.52

 

No

1.11

 

1.06 - 1.15

 

No

 

1.19

 

1.15 - 1.24

 

No

 

 

 

 

 

 

 

 

 

 

 

The abbreviations below apply to all water quality reporting tables

AL = Action Level

MCL = Maximum Contaminant Level

MCLG = Maximum Contaminant Level Goal

NTU = Nephelometric Turbidity Units

MRDL = Maximum Residual Disinfectant Level

MRDLG = Maximum Residual Disinfectant Level Goal

Cleveland Water treatment plant operators work in shifts 24-7-365 to keep safe water flowing to your tap.

Operators control the processes that makes the water safe to drink including monitoring and maintaining the equipment in each treatment plant, performing water quality analysis, and controlling the volume of water that is pumped into and out of plants based on customer use. Operators are certified to do their job and must maintain their certification through the appropriate levels of hands-on work experience, continuing education classes and passing exams to earn each level of certification.

n/a = not applicable ND = Not Detected

ppm = parts per million; or milligrams per liter (mg/L) ppb = parts per billion; or micrograms per liter (µg/L)

  • = a symbol which means less than. A result of <5 means the lowest level that can be detected is 5 and the contaminant in that sample was not detected.

TT = Treatment Technique

D R I N K S A F E W AT E R

I

11

 

Unregulated Contaminant Monitoring Rule (UCMR4)

UNREGULATED CONTAMINANTS

Unregulated contaminants are substances for which USEPA has no established drinking water standards. USEPA requires public water systems to monitor these substances in order to determine where certain substances occur and whether the USEPA needs to regulate those substances in the future. Between December 2019 and September 2020, Cleveland Water participated in the fourth round of the Unregulated Contaminant Monitoring Rule (UCMR4). Contaminants in the below table were detected during UCMR4. Additional contaminants were monitored and not detected. For additional information on UCMR4 results, please call the Cleveland Water Quality line at 216-664-2639. More information about UCMR monitoring requirements is found on the USEPA website: epa.gov/dwucmr.

UCMR 4 samples were taken in various locations. Those defined as “raw” include the untreated source water from Lake Erie coming into each of our plants. Entry point sample locations are fully treated water leaving each plant. Distribution samples are those taken throughout our nearly 5,400 miles of water mains.

Contaminants (Units)

Year(s)

MCLG

Level

Range of Detec-

Sample

Sampled

Found

tions

Location

[Typical Sources in Drinking Water]

 

 

 

 

 

 

 

 

 

 

 

 

Manganese (ppb)

2018-19

n/a

1.13

ND - 3.8

Raw

[naturally occurring in water]

 

 

 

 

 

 

 

 

 

 

 

Germanium (ppb)

2018-19

n/a

0.073

ND - 1.15

Raw

[naturally occurring in water]

 

 

 

 

 

 

 

 

 

 

 

Total Organic Carbon (ppb)

2018-19

n/a

2133

1860 - 2290

Raw

[naturally present in the environment]

 

 

 

 

 

 

 

 

 

 

 

Bromide (ppb)

2018-19

n/a

31.1

26.1 - 35.1

Raw

[naturally occurring in water]

 

 

 

 

 

 

 

 

 

 

 

Haloacetic Acids (HAA5) (ppb)

2018-19

n/a

13.2

7.0 - 22.53

Distribution

[byproducts of drinking water disinfection]

 

 

 

 

 

 

 

 

 

 

 

Haloacetic Acids (HAA9) (ppb)

2018-19

n/a

20.49

11.99 - 32.63

Distribution

[byproducts of drinking water disinfection]

 

 

 

 

 

 

 

 

 

 

 

Haloacetic Acids (HAA6Br) (ppb)

2018-19

n/a

7.97

5.38 - 11.18

Distribution

[byproducts of drinking water disinfection]

 

 

 

 

 

 

 

 

 

 

 

Bromodichloromethane (ppb)

2020

0

3.6

3.0 - 4.0

Entry Point

[byproducts of drinking water disinfection]

 

 

 

 

 

 

 

 

 

 

 

Chloroform (ppb)

2020

70

2.7

2.0 - 3.2

Entry Point

[byproducts of drinking water disinfection]

 

 

 

 

 

 

 

 

 

 

 

Dibromochloromethane (ppb)

2020

60

1.9

1.6 - 2.0

Entry Point

[byproducts of drinking water disinfection]

 

 

 

 

 

 

 

 

 

 

 

1 2

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

WHAT’S NOT IN YOUR WATER

Cleveland Water performs thousands of tests each year to ensure drinking water quality. Many substances that we test for do not appear in this report because they are not found in your drinking water. For example, there are 51 volatile organic chemicals like benzene and 1,2,3-Trichloropropane (TCP) , as well as metals like arsenic, chromium and mercury (just to name a few) that are NOT found in your drinking water, and therefore are NOT listed in this report.

We have been monitoring for cyanotoxins in source and finished water since 2010. Cyanotoxins have never been detected in our finished water, therefore sampling results are not included in this report. We are required to analyze your water regularly for the substances listed in the Average Chemical Values Table on page 14.

We have tested for the six main PFAS chemicals in our source water (Lake Erie) and our finished drinking water as it leaves our treatment plants numerous times. There has not been a reportable detection level for any PFAS chemicals in nearly 300 tests of Cleveland Water. In 2020, our PWS was sampled as part of the State of Ohio’s Drinking Water Per- and Polyfluoroalkyl Substances (PFAS) Sampling Initiative. Six PFAS compounds were sampled, and none were detected in our finished drinking water. PFAS were not detected in our raw water either. For more information about PFAS, please visit pfas.ohio.gov.

If you have questions about what parameters we monitor or have other questions, please call our Water Quality Line at 216-664-2639 or visit our Water Quality webpage at clevelandwater.com/your-water/water-quality-and-treatment/water-quality.

Legend for Average Chemical Values Table (p. 14)

ND = Not Detected

NR = Not Regulated

NA=No Value Required or Available

NM - Not Monitored this year

  1. EPA considers 50 pCi/L to the level of concern for beta emitters and an MCL of 4 mrems/year
  2. Up to 5% monthly of all samples can be positive.
  3. Nephelometric Turbidity Unit - 95% of all samples taken must be less than 0.3 NTU, and no sample may be above 1 NTU.
  4. Treatment technique required rather than the necessity to meet a Maximum Contaminant Level. Required to be > 1.0
  5. Based on first draw samples from customer

taps. These are Action Levels rather than Maximum Contaminant Levels.

6. Ohio EPA considers 0.05 mg/L to be an aesthetic concern, 0.3 mg/L to be a health concern to infants, and 0.3 mg/L for 10 days or 1.0 mg/L for one day to be a health concern to all persons.

Lake Erie raw Sulfate (SO4) level ~ 24 mg/L; treated SO4 ranges from 28-40 mg/L, usually 35-40 mg/L

DD RR II NN KK SS AA FF EE WW ATAT EE RR

II

1313

 

 

 

 

AVERAGE CHEMICAL VALUES

Contaminant

MCL

Cleveland Water

Contaminant

MCL

Cleveland Water

 

 

 

 

 

 

Volatile Organics

 

 

Synthetic Organics

 

 

 

 

 

 

 

 

Benzene

0.005

ND

Alachlor

0.002

ND

 

 

 

 

 

 

Bromobenzene

NR

ND

Atrazine

0.003

ND

 

 

 

 

 

 

Bromochloromethane

NR

ND

Simazine

0.004

ND

 

 

 

 

 

 

Bromomethane

NR

ND

Inorganics

 

 

 

 

 

 

 

 

Carbon tetrachloride

0.005

ND

Aluminum (Secondary MCL)

0.05 - 0.2

0.008

 

 

 

 

 

 

(mono) Chlorobenzene

0.1

ND

Antimony

0.006

ND

 

 

 

 

 

 

Chloroethane

NR

ND

Arsenic

0.010

ND

 

 

 

 

 

 

Chloromethane

NR

ND

Barium

2

0.015

 

 

 

 

 

 

2-Chlorotolulene

NR

ND

Berylium

0.004

ND

 

 

 

 

 

 

4-Chlorotoluene

NR

ND

Cadmium

0.005

ND

 

 

 

 

 

 

Dibromomethane

NR

ND

Chromium

0.1

ND

 

 

 

 

 

 

1,2-Dichlorobenzene (o-dichlorobenzene)

0.6

ND

Copper (90th percentile)5

1.3

0.11

 

 

 

 

 

 

1,3-Dichlorobenzene (m-dichlorobenzene)

NR

ND

Cyanide

0.2

ND

 

 

 

 

 

 

1,4-Dichlorobenzene (p-dichlorobenzene)

0.075

ND

Fluoride

4

0.99

 

 

 

 

 

 

Dichlorodifluoromethane

NR

ND

Iron

NR

ND

 

 

 

 

 

 

1,1-Dichloroethane

NR

ND

Lead (90th percentile)5

0.015

0.00184

 

 

 

 

 

 

1,2-Dichloroethane (-ethylene)

0.005

ND

Manganese 6

0.05/0.3/1.0

ND

 

 

 

 

 

 

1,1-Dichloroethene (-ethylene)

0.007

ND

Mercury

0.002

ND

 

 

 

 

 

 

cis-1,2-Dichloroethene (-ethylene)

0.07

ND

Molybdenum

NR

NA

 

 

 

 

 

 

trans-1,2-Dichloroethene (-ethylene)

0.1

ND

Nickel

NR

ND

 

 

 

 

 

 

Dichloromethane

0.005

ND

Nitrate

10

0.29

 

 

 

 

 

 

1,2-Dichloropropane

0.005

ND

Potassium

NR

NM

 

 

 

 

 

 

1,3-Dichloropropane

NR

ND

Selenium

0.05

ND

 

 

 

 

 

 

2,2-Dichloropropane

NR

ND

Silica

NR

NA

 

 

 

 

 

 

1,1-Dichloropropene

NR

ND

Silver (Secondary MCL)

0.1

NA

 

 

 

 

 

 

1,3-Dichloropropene

NR

NA

Sodium

NR

10.4

 

 

 

 

 

 

Ethylbenzene

0.7

ND

Strontium

NR

NA

 

 

 

 

 

 

Hexachlorobutadiene

NR

ND

Thallium

0.002

ND

 

 

 

 

 

 

Isopropylbenzene

NR

ND

Vanadium

NR

NM

 

 

 

 

 

 

4-Isopropyltoluene

NR

ND

Zinc (Secondary MCL)

5

ND

 

 

 

 

 

 

Napthalene

NR

ND

Miscellaneous

 

 

 

 

 

 

 

 

n-Propylbenzene

NR

ND

Chloride

250

19.5

 

 

 

 

 

 

Styrene

0.1

ND

Total Dissolved Solids

500

150

 

 

 

 

 

 

1,1,1,2-Tetrachloroethane

NR

ND

Odor (Threshold Odor No.)

3

NA

 

 

 

 

 

 

1,1,2,2-Tetrachlorethane

NR

ND

Magnesium

NR

8.5

 

 

 

 

 

 

Toluene

1

ND

Calcium

NR

17.4

 

 

 

 

 

 

1,1,1-Trichloroethane

0.2

ND

Total Organic Carbon

TT4

1.40

 

 

 

 

 

 

Tetrachloroethene (-ethylene)

0.005

ND

pH

>7.0

7 - 7.7, ave. 7.3

 

 

 

 

 

 

1,2,3-Trichlorobenzene

NR

ND

Alkalinity

NR

81

 

 

 

 

 

 

1,2,4-Trichlorobenzene

0.07

ND

Orthophosphate

>0.8

0.99 - 2.63, ave. 1.29

 

 

 

 

 

 

Trichloroethene

0.005

ND

Hardness (as CaCO3)

NR

112 - 121, ave. 116

1,1,2-Trichloroethane

0.005

ND

Turbidity (NTU)3

0.3

0.04

 

 

 

 

 

 

Trichlorofluoromethane

NR

ND

Total Coliform2

<5%

0.0%

 

 

 

 

 

 

1,2,3-Trichloropropane

NR

ND

Disinfection Byproducts

 

 

 

 

 

 

 

 

Vinyl chloride

0.002

ND

Total Trihalomethanes

0.08

0.029

 

 

 

 

 

 

Xylenes, total

10

ND

Haloacetic Acids 5

0.06

0.017

 

 

 

 

 

 

m-Xylene

NR

NA

Radionuclides

 

 

 

 

 

 

 

 

o-Xylene

NR

NA

Beta Emitters (pCi/L)1

50

NM

 

 

 

 

 

 

p-Xylene

NR

NA

Alpha Emitters (pCi/L)

15

NM

 

 

 

 

 

 

Results and MCLs in ppm unless noted

 

 

Radium 226/228 (pCi/L)

5

NM

 

 

 

 

 

 

KEEP YOUR HOME’S WATER HEALTHY

Clean, Flush and Consume Cold are the actions all customers should implement to help ensure the highest quality of water is coming out of your tap, especially if there is the possibility of lead in your plumbing system. In some situations, a water system repair/replacement may temporarily increase lead levels in water and/or cause discoloration. As a standard practice the USEPA recommends these actions (clean, flush, consume cold) which are important to take when water has been restored after a disruption of service.

CLEAN

Clean your faucet aerator screens regularly. Small particles of solder and other material can accumulate in faucet aerators and in some circumstances can release lead into the water. Aerators should be cleaned at least twice a year, and more frequently after work is done to your plumbing system.

FLUSH

Flush your cold water lines before consuming water when water has not been used for 6 or more hours. The goal is to have cold, fresh water from the main in the street come out of your tap before drinking the water. To flush the plumbing, run water until you feel a temperature change then run water for an additional 30 seconds to 3 minutes. The time depends on the length and diameter of your service line. The farther your home is from the street, the longer you need to flush. When in doubt, flush it out.

CONSUME COLD

Always use cold water for cooking, drinking and preparing baby formula. Hot water corrodes pipes faster and is more likely to contain lead. If you need hot water for food or drinks, get water from the cold water tap then heat the water.

D R I N K S A F E W AT E R

I

15

 

Galvanized

Copper

Lead

LEAD AND COPPER MONITORING

Cleveland Water regularly monitors for lead and copper from homes in the Cleveland Water distribution system that meet Tier 1 requirements (i.e. have lead in their plumbing system). Our system-wide monitoring results have been lower than the federal action level for lead of 15 parts per billion (ppb) for more than 20 years, therefor we are on a reduced monitoring schedule as determined by Federal and state regulations. The low lead levels are a direct result of Cleveland Water’s consistency and successful implementation of treatment techniques to prevent corrosion. Our treatment techniques are adding orthophosphate to finished water, and keeping the pH of water above 7 at all times.

The results in the table are the most recent compliance results from water samples taken June-September 2018. There were no violations or lead or copper action level exceedances. We will monitor again in 2021.

The graphed orange line shows our lead compliance monitoring results since we began testing. The graph also shows how lead levels dropped and stayed below the federal action level since we implemented our corrosion control treatment techniques.

FederalLead Action Level = 15 partsperbillion (ppb)

YEAR Sampled - Contaminant (Units)

 

Individual

90% of test

 

 

AL

levels were less

 

Violation

[Typical Sources in Drinking Water]

Results over AL

 

 

than

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2018 - Copper (ppm)

1.3 ppm

0

 

0.11 ppm

 

No

 

 

 

 

 

 

 

Copperand

[Corrosion of household

 

 

 

 

 

 

plumbing systems; Erosion

 

0 out of 55 samples had levels in excess of the

 

of natural deposits]

 

 

 

 

 

copper action level of 1.3 ppm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lead

2018 - Lead (ppb)

15 ppb

0

 

1.84 ppb

 

No

[Corrosion of household

 

 

 

 

 

 

 

 

 

plumbing systems; Erosion

 

 

 

 

 

 

 

of natural deposits]

 

0 out of 55 samples had levels in excess of the

 

 

 

 

 

 

 

 

 

lead action level of 15 ppb

 

 

 

 

 

 

 

 

 

1 6

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

HOW TO DETERMINE IF YOU HAVE LEAD IN YOUR WATER SYSTEM

Cleveland Water is virtually lead free when it leaves our treatment plants. Our water mains are not made from lead. Lead can be present in service lines and in customers’ plumbing, faucets and fixtures. Not all customers have lead in their service line or plumbing system.

CHECK

Check the type of material of your city-owned service line online at clevelandwater.com/lead.

TEST

Test your service line material. Our video shows you how (http://youtube.com/watch?v=AiU7GHzD_Ck). If a magnet sticks to the service line where it enters your home, it is galvanized steel. If you scratch the pipe with a penny and the metal is shiny like a penny, it is copper. If the scratched metal is shiny silver and flakes off, it is lead. You can record your results online or call us at 216-664-2882 and we will record the results for you (see pictures on page 16).

DATE

The date plumbing components in your home were made/installed is important. Homes built after 1954 should not have a lead service line or lead plumbing. Before 1986, the level of lead in solder used to join copper pipes was usually 50%. In 1986, the allowable level of lead in solder was reduced to less than 0.2%

and the allowable level in brass components in potable water faucets was reduced to less than 8%. In 2014, the allowable level of lead

in brass alloy used for potable water faucets, fittings and meters was reduced to less than 0.25%.

Water Main

 

City-Owned

Customer-Owned

Service Line

Service Line

Test Here

Water Meter

Cleveland Water

Customer

Responsibility

Responsibility

 

Curb Stop

 

I

 

D R I N K S A F E W AT E R

 

17

 

 

 

ADDITIONAL ACTIONS TO ADDRESS LEAD IN SERVICE LINES AND PLUMBING

Cleveland Water is safe and we take additional steps to remove lead and educate customers on their responsibility for maintaining healthy water in their homes. We:

  • Remove lead service lines when they are disturbed during water main repair and replacement projects.
  • Replace the city-owned portion of a lead service line when a customer-owned service line is replaced. Call 216-664-6745 to obtain service line replacement permits.
  • Seek homeowners who have a lead service line to volunteer their home for our Lead and Copper Compliance Monitoring Program. To find out if your home meets Tier 1 requirements and you are interested in sampling, please call 216-664-2639.
  • Implement a Lead Awareness Campaign to meet a portion of the notification requirements in Ohio Administrative Code Rule 3745-83-02. Our education materials include brochures, flyers, videos, social media posts and graphics. They can be found online at clevelandwater.com/lead or obtained by calling our Lead Inquiry Line at 216-664-2882 to request printed copies and/or a group presentation.
  • Provide 3-months of water filters certified to remove lead if a partial lead service line is left behind.
  • Offer free water quality sampling for lead anytime a lead service line is removed.
  • Launched a Childcare Lead Service Line Removal program in 2020 for all licensed childcare providers in Cuyahoga County in our director service area. The program, which will remove all service line lead material and replace it with copper, will be implemented in 2021 and 2022 at no cost to these providers. If you are the owner/operator of a licensed childcare and would like to participate in this program, please call our Water Quality Line at 216-664-2639.

If you are concerned about lead in your water, you may wish to have your water tested. A list of laboratories certified in the state of Ohio to test for lead may be found at http://www.epa.ohio.gov/ddagw or by calling 614-644-2752. Information on lead

in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline at 800-426-4791 or at http://www.epa.gov/safewater/lead.

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. Cleveland Water is responsible for providing high quality drinking water but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking.

1 8

I

2 0 2 0 W AT E R Q U A L I T Y R E P O R T

 

PUBLIC PARTICIPATION

Cleveland Water does not hold regular public meetings. However, the public may participate through attending the Public Utilities Committee meetings. Meetings are generally held every other Tuesday at 1:30 pm at Cleveland City Hall. During the Covid-19 pandemic, council is meeting virtually during the City of Cleveland’s emergency declaration and in accordance with Ohio’s Open Meetings Law under H.B. 404. Committee and council meetings are listed on the Cleveland City Council calendar at https://clevelandcitycouncil.org/calendar and can be watched live on TV20 and YouTube.

For more information on your drinking water

  • To learn more about Cleveland Water visit clevelandwater.com
  • Questions about information contained in this report should be directed to our Water Quality Line: 216-664-2639.
  • Questions about lead in drinking water and our prevention and lead mapping efforts should be directed to our Lead Inquiry Line: 216-664-2882.
  • Virtual speakers will continue to be available for your event or group with in-person appearances resuming when it is considered safe to do so. For more information contact our Public Education and Outreach Team: 216-664-3173.

D R I N K S A F E W AT E R

I

19

 

PLEASE SHARE THIS INFORMATION

In 2020, Cleveland Water surpassed all federal and state standards for water quality, the data for which is presented in this report.

Please share this information with all other people who drink Cleveland Water, especially those who may not have received this Water Quality Report directly (for example, people in apartments, nursing homes, schools and businesses). You can do this by posting the report in a public place or distributing copies by hand or in the mail. This report is also available online: clevelandwater.com/2020WQR

Cleveland Water

1201 Lakeside Avenue • Cleveland, Ohio 44114

216.664.2444 | clevelandwater.com

clevelandwater @clevelandwater

D R I N K S A F E W AT E R

I

20

 

Contaminants


Cleveland Public Water System

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Ohio Environmental Protection Agency - Division of Drinking and Ground Waters, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 1262955
  • Data available: 2012-2017
  • Data Source: Surface water
  • Total: 21

Contaminants That Exceed Guidelines

  • Bromodichloromethane
  • Chloroform
  • Chromium (hexavalent)
  • Dibromochloromethane
  • Dichloroacetic acid
  • Nitrate
  • Nitrate and nitrite
  • Total trihalomethanes (TTHMs)
  • Trichloroacetic acid

Other Detected Contaminants

  • Bromoform
  • Bromomethane
  • Chlorate
  • Dibromoacetic acid
  • Fluoride
  • Haloacetic acids (HAA5)
  • Molybdenum
  • Monobromoacetic acid
  • Monochloroacetic acid
  • Strontium
  • Testosterone
  • Vanadium

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

Cleveland Tap Water

For most of us, we take our water for granted. Most people do not realize the hard work and investment that the city, county, and state invest in providing safe, clean water to its residents. This is especially true with the amount of water treatment technologies being used to keep the water clean. Thanks to the efforts of the City of Cleveland and the State of Ohio, drinking tap water is no longer just safe; it is downright great! With a wide range of contaminants like chlorine, lead, cysts, and herbicides, there are a number of steps you can take to ensure that the next time you step foot into your kitchen or bathroom, you are really enjoying a great source of water!

The first thing you need to do is make sure that your water is well-maintained by your local water treatment plant. These facilities use advanced technology to treat your water, along with stringent standards to rid it of harmful contaminants, as well as ensure that the water is healthy. In fact, many of these facilities will test your water before it goes out onto the market, to ensure that it is clean and healthy. They also perform routine maintenance on the pipes and treatment centers themselves to make certain that everything is working properly. If you have well water or have a well that is used by more than one household, it might be a good idea to have your water tested as well.

If your water source is not well, there are a number of options available to you. You can buy a filter to use at home, or have your city provide one for you. While filters can be expensive, particularly if you need an anti-depressant-like filter or something that will rid your water of cysts and other harmful contaminants, they can be effective and can help to get rid of the harmful bacteria that might otherwise be harming your family. Your local water treatment facility is usually happy to install such a filter for you since doing so helps them to get a share of the sales from your water purchase!

Cleveland Drinking Water

The fact that the water from Cleveland is contaminated by chlorine is astonishing considering that the water is used for so many purposes in the city. However, not all of the people of Cleveland are to blame as the treatment and water purification process of the drinking water in the city has been found to be inadequate. It is unfortunate that such a large-scale operation that was supposed to be so efficient is not what it should be. There are many other contaminants that are now flowing into the city’s water supply that has caused it to become an unhealthy city.

In addition to the drinking water stations in the city of Cleveland are found to be inadequate, it has been found that many homes are also suffering from the presence of dangerous lead in their tap water. Lead is a dangerous substance that is known to cause learning disabilities and behavioral problems in children. These are only a few examples of how the tap water system in Cleveland is a bit of a problem. It is important that this information is made known to the residents of the city so that they can protect themselves from these pollutants. The good news is that the people of Cleveland have rights when it comes to their water supplies and with the help of the American Rights Network they can take advantage of these rights in order to be fully protected.

If you feel that you may have been the victim of lead poisoning then you will want to know your rights and contact a lawyer who is well trained in this type of case. The rights of those who live in Cleveland and the water stations that provide this water cannot be violated. It is in the best interest of all individuals living in or around Cleveland to get a water filter system installed in their home in order to ensure that the water they drink and use on a daily basis is pure and clean. A lawyer can explain all of your rights and help you determine the steps you need to take to protect them. City water is regulated by the Environmental Protection Agency and the Clean Water Act.

Cleveland Water

There are some things that you should know about the treatment of your drinking water in Cleveland. The City of Cleveland is fortunate to have a wonderful water supply that serves many areas and industries. The water that is provided by the City of Cleveland is filtered and treated to help ensure that it is safe to drink and not harmful to your health. Many people think that there is only chlorine in the water that comes out of the tap. That is not the case as many people also are concerned with harmful chemicals that can be found in many older plants that have been forgotten about and have now been replaced with newer plants.

One of the most important aspects of having safe water to drink is that the water has to be filtered. A person does not realize the importance of the water filter on their kitchen sink and how it can make such a big difference in their daily life. Most homes these days have both a refrigerator and a water filter. These filters do a great job at ensuring that the water that is coming from the faucet is safe and clean. In fact, if you are like most people who take pride in your appearance and health then you are probably already taking steps to make sure that you are consuming safe and healthy water.

The water that is piped into most apartments is treated at a plant that is located in Cleveland itself. This means that this is treated to get rid of bacteria and mold so that it is safe for the residents of these apartments to use on a daily basis. However, you do need to make sure that the water you are using is not heavily advertised on television or radio that is used to attract you to subscribe to this service. If the Cleveland water company is using television or radio advertising to promote their water then you will not receive any of the benefits of having purified water. You may actually find that the more you pay for the water the more you are receiving. The advertising dollars are spent to attract you to subscribe to their service rather than you actually receive any benefits from the water.

Cleveland Water Utility

The Cleveland water utility company is the largest water utility in Ohio. It also happens to be among the most efficient, and in many ways, one of the leaders in water conservation and quality. They are constantly upgrading their infrastructure, facilities, and tools to make the water that comes through their pipes cleaner and more effective for the people of Cleveland and the surrounding regions. If you live in the area, it may be time to talk to a Cleveland water utility about whether or not you are serviced by a company that has a clean rating. There are a number of different aspects of cleanliness and efficiency that can impact your water utility bill, so knowing exactly who provides your water in your area is important in order to find the best deal on your next bill.

The best way to know if you have a good company nearby is to simply ask. Many residents have noticed that the phone lines at the water utility company in Cleveland are usually full during certain times of the week, and during other times of the week, they seem to run out completely. This is no coincidence, as it’s common for billing cycles to occur at odd hours. If you notice that this is the case, call your water utility company to see if they have a special rate for high traffic periods. These are typically Sunday through Wednesday, from noon until 3 pm. It’s not uncommon for customers to pay less than usual during these hours because the volume of people using the water utility is significantly lower during this time.

If you’re unable to find a special rate, or if you notice that the phone lines at your water utility in Cleveland are constantly busy, or out of commission all the time, you might want to think about signing up for a clean energy account. These accounts allow you to generate energy off of your water consumption and use it to power you’re home. If you’re careful not to overuse the energy that you generate, you can typically get a good rate on this clean energy account with your Cleveland water utility. Just make sure that you keep your water utility bill updated so that you’ll be able to qualify for a good rate.

Cleveland Water Treatment

If you are looking for a dependable and affordable source of drinking water in Cleveland, then look no further than the well provided by the Cleveland water treatment facility. This highly acclaimed and selective water treatment facility offers a wide variety of different drinking water filtering systems and services to meet the needs of residents throughout the city of Cleveland. Here, you will be provided with the latest information on how your water is being treated, what the quality standards are, how you can reduce or eliminate your reliance on traditional municipal sources of drinking water, and how you can make your water a better source of health for you and your family.

The drinking water supply in Cleveland is a regulated system under the Environmental Protection Agency that is required to meet certain guidelines set forth by the Ohio Department of Health. The water served by the treatment facility is tested on a regular basis and the test results are posted to show where the most issues might be located. This allows the public to have easy access to important information regarding the environmental impact of various water treatment methods and to make educated decisions regarding their own individual drinking water needs. As the most advanced municipal water treatment facility in the region, the staff of the Cleveland water treatment facility works diligently to ensure that all levels of water quality are met, ensuring that the health of every resident in Cleveland and beyond is not threatened by the use of untreated water.

You have likely heard the expression, “you get what you pay for” and this is certainly true when it comes to the treatment of your local drinking water. The amount of money required to treat your water can vary greatly depending on the type of filtration technology you are looking for as well as the type of contaminant you are trying to remove. Fortunately, those looking to save some money on their water bill can often find some excellent deals on filtration technology by shopping online. While it may be tempting to spend less in an attempt to reduce your water consumption, cutting corners on water treatment equipment can ultimately end up costing you more in the long run due to the unnecessary wear and tear to your filtration technology. Instead of settling for the second best, take the extra few minutes to research the best filters for your family and drinking water consumption and see how much you can save.

Water Treatment Plants in Cleveland

Cleveland Water Treatment Plants is located in Cleveland, Ohio and they provide the city with drinking water that is clean and safe. Cleveland is one of the biggest cities in the United States and it has a population of over eight million. This means that every year, the amount of wastewater and sewage coming out of the city is enormous. Most people don’t give much importance to the treatment of their water, but it is imperative that it should be protected because it could be doing a lot of damage to your health in the long run.

If you live in Cleveland, you will find that tap water that contains a lot of different contaminants can have a harmful effect on your health. A lot of people tend to disregard the need for water treatment, but the truth is that it is just as important to drink clean water as it is to bathe in it. Just imagine how your health will progress if you don’t make use of a water treatment plant, right? It is true that you cannot see the effects of pollution on your body directly, but you can get a good feel for it indirectly. When you take a shower or when you put your food on the plate, you are indirectly sending polluted water to your body.

You have to realize that the water treatment plants in Cleveland help you to protect the general public’s health by removing all these contaminants from the water. If everybody living in Cleveland were to do their own water treatment, we wouldn’t have such problems with contamination anymore. The water treatment plants will remove any type of contaminants that could harm the human body. All you have to do is to buy a good tap water purification system, get it installed, and start enjoying the healthy water that you are used to having at home.

Cleveland Water Contaminants

The fact that Cleveland is the fifth-largest water treatment facility in the United States is already a measure of its success in fighting pollution. The question then becomes, what other secrets does this city have to overcome before it can claim the title of having the best water treatment system in the country? This article will show you some of the tactics that this iconic city uses when cleaning its water.

The first thing that you should know about the water treatment in Cleveland is that it is treated using salt. Salt is used because of the large number of minerals that make up this drinking water. By using it, we are keeping harmful toxins and contaminants from the drinking water and at the same time keeping it healthy. It also makes it easier for us to consume since it tastes delicious. In fact, it has been used as the main ingredient in some of the most famous drinks in history.

Another thing that you should know about the water treatment in Cleveland is that it uses a lot of electricity. As a matter of fact, the city of Cleveland receives more than twelve million calls each year asking for drinking water. With that much demand, it comes as no surprise that so much energy is being used in treating the water. However, using too much electricity can be harmful, so it is important to have a tap water filter in place that will filter out any unnecessary noise. This way, you will be able to have peace of mind that drinking water is safe to do so.

Cleveland Health Guidelines

Do we know that the drinking water in Cleveland has some unhealthy levels of chlorine and lead, but is it safe to drink? These levels are well below what the health department recommends and still make it unsafe for drinking. If you were to do a search on the Internet, you would find that most people believe the answer is yes. Unfortunately, most experts don’t think so because they don’t know about all the testing and research that need to be done to determine just how safe it really is.

Water treatment plants use chlorine, which is an element, to kill bacteria and keep the tap water clean. Chlorine is extremely toxic to humans when it gets too much. In fact, it was once used as a remedy for waterborne illnesses, such as cholera, typhoid fever, and diarrhea. However, chlorine causes so many problems and is so overused that it is no longer necessary.

The levels of lead in the tap water supply of Cleveland are not good either. Lead can cause developmental problems in children and can affect the nervous system. It has also been shown to cause health problems in adults such as bladder cancer and atherosclerosis, which is the hardening of the arteries. All of this research says there is definitely a problem, and that it is time for residents of Cleveland to start dealing with it. Don’t wait until it’s too late.

Layer 1
Layer 1
Layer 1
Layer 1